基于扩展分形和CFAR特征融合的SAR图像目标识别

研究了多信息融合技术在SAR图像目标识别中的应用。将扩展分形特征(Extended Fractal)与双参数恒虚警特征(Double Parameter CFAR)形成的多信息进行融合处理。运用Dempster-Shafer证据理论，在决策层对SAR图像中的像素进行识别分类。实验结果表明通过融合对像素分类的准确性明显好于单特征的检测结果，减少了虚警概率，提高了系统的识别能力。     

线性调频信号检测方法的研究

在线性调频信号体制雷达的数字脉冲压缩系统中对数字脉压后的脉冲串进行DFT相参处理时，若采样时刻偏离脉压回波的峰值时刻，不同的采样频率使得DFT相参积累后的信噪比会有不同程度的损失。本文详细分析了采样频率分别为20MHz和10MHz时对信号相参积累的影响，并对幅值检测和M／N检测两种检测方法的检测性能进行了比较，仿真结果表明，M／N检测优于幅值检测。     

高功率脉冲水中放电的应用及其发展

首先介绍了高功率脉冲水下放电的机理，然后综合论述了其应用和研究的状况，从较为成熟的脉冲水处理技术到医疗领域的ESWL应用技术，以及在脉冲电场食品杀菌和水下目标探测方面的最新发展和研究，最后指出了高功率脉冲电技术应用前景以及进行更系统和深入研究的必要性。     

基于贝叶斯理论的城市供水管网泄漏在线检测与定位

许多城市的供水管网都安装了SCADA(Supervisory Control And Data Acquisition)系统,基于SCADA系统监测到的数据可对管网泄漏进行检测。通过引进统计学概率论中一基本定理——贝叶斯定理来建立管网泄漏的在线检测与定位模型,一定程度上解决了水力模拟误差、测量误差、测点配置等因素导致的不确定性问题。模型通过实例考核取得较为满意的诊断结果。     

基于Agent的分布式入侵检测系统研究

为了提高入侵检测系统在体系结构上的灵活性、提高入侵检测的速度,本文将Agent技术应用于入侵检测,探讨了基于Agent的入侵检测技术和模型。首先分析了网络安全及入侵检测系统的研究现状及发展趋势,以及入侵检测技术在网络安全中的重要地位和作用。在对入侵检测技术及Agent技术深入分析的基础之上,提出了一种基于Agent的入侵检测系统模型,研究了构成基本构架的各个子系统在整个模型中的作用及相互关系,给出了各自的设计实现方法,并重点讨论了基于Agent的分布式入侵检测系统模型的通信问题。     

A New Approach for Built‐in Self‐Test of 4.5 to 5.5 GHz Low‐Noise Amplifiers

This paper presents a low‐cost RF parameter estimation technique using a new RF built‐in self‐test (BIST) circuit and efficient DC measurement for 4.5 to 5.5 GHz low noise amplifiers (LNAs). The BIST circuit measures gain, noise figure, input impedance, and input return loss for an LNA. The BIST circuit is designed using 0.18 μm SiGe technology. The test technique utilizes input impedance matching and output DC voltage measurements. The technique is simple and inexpensive.     

子空间方法盲多用户检测技术分析与探索

着重分析了基于子空间跟踪的盲线性多用户检测算法 ,并对其内部算法模块进行了仿真比较 ,最后对算法性能改善方法提出了自己的新思路     

海杂波中基于混沌预测的目标检测方法改进

基于记忆库非线性预测的NP-CFAR方法是目前混沌海杂波背景中目标检测的一种典型而先进的方法.考虑到海杂波功率与特征的时变不稳定性,本文提出运用旋转超盒分类取代这一方法中的NP-CFAR进行目标检测,并探讨了运用盒维数特征提取进行预处理以节省运算开销的问题.仿真实验验证了本文所提改进方法的有效性.     

Signal Integrity: Fault Modeling and Testing in High-Speed SoCs

As we approach 100 nm technology the interconnect issues are becoming one of the main concerns in the testing of gigahertz system-on-chips. Voltage distortion (noise) and delay violations (skew) contribute to the signal integrity loss and ultimately functional error, performance degradation and reliability problems. In this paper, we first define a model for integrity faults on the high-speed interconnects. Then, we present a BIST-based test methodology that includes two special cells to detect and measure noise and skew occurring on the interconnects of the gigahertz system-on-chips. Using an inexpensive test architecture the integrity information accumulated by these special cells can be scanned out for final test and reliability analysis.     

A Combined Antenna Array and Multi-User Detection DS-CDMA Receiver in Single-Path and Multi-Path Fading Channels

An adaptive antenna array is incorporated into a decorrelatingmulti-user detector to effectively increase the DS-CDMA system capacity.Capacity improvement is due to beamforming gain, spatial diversity gain(assuming large angle spread), and the decorrelating effect. Thereceiver has been analyzed for the cases of sufficiently andinsufficiently spaced receiving antennas. The receiver consists of afront-end beamformer for every user in the cell and has knowledge of allusers' signature sequences. The beamformer estimates the desired userchannel vector, enhancing its signal and reducing the co-channelinterference from other directions. The multi-user detection, exploitingknowledge of other users, rejects those interferers whose arrival anglesare close to that of the desired user. The average uncoded Bit ErrorRate (BER) as a function of the number of in-beam active users, theaverage antenna Signal-to-Noise Ratio (SNR), and the number of receivingantennas is examined in both single-path and multi-path Rayleigh fadingchannels. Analysis shows an increase in system capacity proportional tothe number of receiving antennas.